DESCRIPTION

The E-Totem is a charging station for electric vehicles.

The structure of the E-Totem consists of:

• A body in thermoplastich with two ventilation grills"
• A zinc-coated steel frame with standard profiles for the mounting of the wiring.This structure is used as well for the fixing of the socket-panel.
• A flange in thermoplastic for the fixing of the shell to the inner structure
• An upper door with Park & Charge lock and gas springs
• A lower door equipped with lock Kaba 5000 allows the access to the main cricuit breaker and to the meter (if available)
  

The E-Totem is available in three versions:

• E-Totem : 1x10A - 2x16A (standard)
• E-Totem : 1x10A + 1x16A + 1x32A
• E-Totem : 3x16A

The three versions are also available without electric equipment.

The execution of the E-Totem includes: supply cable 380 VAC 3P+N+PE of 16 mm2, 1 circuit breaker, 1 neutral breaker, ground-fault circuit interrupter (for each socket), , 3 sockets of 10A, 16A, 16/32A, in 3 different combinations.

.